Une clé API est requise pour que les demandes soient traitées par le système. Une fois qu'un utilisateur s'inscrit, une clé API est automatiquement générée pour cet utilisateur. La clé API doit être envoyée avec chaque requête (voir l'exemple complet ci-dessous). Si la clé API n'est pas envoyée ou a expiré, il y aura une erreur. Assurez-vous de garder votre clé API secrète pour éviter les abus.
Pour vous authentifier auprès du système API, vous devez envoyer votre clé API en tant que jeton d'autorisation avec chaque demande. Vous pouvez voir un exemple de code ci-dessous.
curl --location --request POST 'https://b2s.io/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/url/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
Notre API dispose d'un limiteur de débit pour se protéger contre les pics de demandes afin de maximiser sa stabilité. Notre limiteur de débit est actuellement limité à 30 requêtes par 1 minute.
Plusieurs en-têtes seront envoyés avec la réponse et ceux-ci peuvent être examinés pour déterminer diverses informations sur la demande.
X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
Toutes les réponses de l'API sont renvoyées au format JSON par défaut. Pour convertir cela en données utilisables, la fonction appropriée devra être utilisée en fonction de la langue. En PHP, la fonction json_decode() peut être utilisée pour convertir les données en objet (par défaut) ou en tableau (définissez le deuxième paramètre sur true). Il est très important de vérifier la clé d'erreur car elle indique s'il y a eu une erreur ou non. Vous pouvez également vérifier le code d'en-tête.
{
"error": 1,
"message": "An error ocurred"
}
https://b2s.io/api/campaigns?limit=2&page=1
To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/campaigns?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"campaigns": [
{
"id": 1,
"name": "Sample Campaign",
"public": false,
"rotator": false,
"list": "https:\/\/domain.com\/u\/admin\/list-1"
},
{
"id": 2,
"domain": "Facebook Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/test",
"list": "https:\/\/domain.com\/u\/admin\/test-2"
}
]
}
}
https://b2s.io/api/campaign/add
A campaign can be added using this endpoint.
Paramètre | La description |
---|---|
name | (optional) Campaign name |
slug | (optional) Rotator Slug |
public | (optional) Access |
curl --location --request POST 'https://b2s.io/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/campaign/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'New Campaign',
'slug' => 'new-campaign',
'public' => true,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 3,
"domain": "New Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/new-campaign",
"list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
https://b2s.io/api/campaign/:campaignid/assign/:linkid
A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.
curl --location --request POST 'https://b2s.io/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/campaign/:campaignid/assign/:linkid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Link successfully added to the campaign."
}
https://b2s.io/api/campaign/:id/update
To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Paramètre | La description |
---|---|
name | (required) Campaign name |
slug | (optional) Rotator Slug |
public | (optional) Access |
curl --location --request PUT 'https://b2s.io/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/campaign/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'Twitter Campaign',
'slug' => 'twitter-campaign',
'public' => true,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 3,
"domain": "Twitter Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/twitter-campaign",
"list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
https://b2s.io/api/campaign/:id/delete
To delete a campaign, you need to send a DELETE request.
curl --location --request DELETE 'https://b2s.io/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/campaign/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Campaign has been deleted successfully."
}
https://b2s.io/api/channels?limit=2&page=1
To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/channels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"channels": [
{
"id": 1,
"name": "Channel 1",
"description": "Description of channel 1",
"color": "#000000",
"starred": true
},
{
"id": 2,
"name": "Channel 2",
"description": "Description of channel 2",
"color": "#FF0000",
"starred": false
}
]
}
}
https://b2s.io/api/channel/:id?limit=1&page=1
To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/channel/:id?limit=1&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"items": [
{
"type": "links",
"id": 1,
"title": "My Sample Link",
"preview": "https:\/\/google.com",
"link": "https:\/\/b2s.io\/google",
"date": "2022-05-12"
},
{
"type": "bio",
"id": 1,
"title": "My Sample Bio",
"preview": "https:\/\/b2s.io\/mybio",
"link": "https:\/\/b2s.io\/mybio",
"date": "2022-06-01"
}
]
}
}
https://b2s.io/api/channel/add
A channel can be added using this endpoint.
Paramètre | La description |
---|---|
name | (required) Channel name |
description | (optional) Channel description |
color | (optional) Channel badge color (HEX) |
starred | (optional) Star the channel or not (true or false) |
curl --location --request POST 'https://b2s.io/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/channel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'New Channel',
'description' => 'my new channel',
'color' => '#000000',
'starred' => true,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 3,
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}
https://b2s.io/api/channel/:channelid/assign/:type/:itemid
An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.
Paramètre | La description |
---|---|
:channelid | (required) Channel ID |
:type | (required) links or bio or qr |
:itemid | (required) Item ID |
curl --location --request POST 'https://b2s.io/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/channel/:channelid/assign/:type/:itemid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Item successfully added to the channel."
}
https://b2s.io/api/channel/:id/update
To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Paramètre | La description |
---|---|
name | (optional) Channel name |
description | (optional) Channel description |
color | (optional) Channel badge color (HEX) |
starred | (optional) Star the channel or not (true or false) |
curl --location --request PUT 'https://b2s.io/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/channel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'Acme Corp',
'description' => 'channel for items for Acme Corp',
'color' => '#FFFFFF',
'starred' => false,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Channel has been updated successfully."
}
https://b2s.io/api/channel/:id/delete
To delete a channel, you need to send a DELETE request. All items will be unassigned as well.
curl --location --request DELETE 'https://b2s.io/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/channel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Channel has been deleted successfully."
}
https://b2s.io/api/qr?limit=2&page=1
Pour obtenir vos codes QR via l'API, vous pouvez utiliser ce point de terminaison. Vous pouvez également filtrer les données (voir le tableau pour plus d'informations).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/qr?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"qrs": [
{
"id": 2,
"link": "https:\/\/b2s.io\/qr\/a2d5e",
"scans": 0,
"name": "Google",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"link": "https:\/\/b2s.io\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
}
]
}
}
https://b2s.io/api/qr/:id
Pour obtenir les détails d'un seul code QR via l'API, vous pouvez utiliser ce point de terminaison.
curl --location --request GET 'https://b2s.io/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/qr/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"details": {
"id": 1,
"link": "https:\/\/b2s.io\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
},
"data": {
"clicks": 1,
"uniqueClicks": 1,
"topCountries": {
"Unknown": "1"
},
"topReferrers": {
"Direct, email and other": "1"
},
"topBrowsers": {
"Chrome": "1"
},
"topOs": {
"Windows 10": "1"
},
"socialCount": {
"facebook": 0,
"twitter": 0,
"instagram": 0
}
}
}
https://b2s.io/api/qr/add
To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Paramètre | La description |
---|---|
type | (required) text | vcard | link | email | phone | sms | wifi |
data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
background | (optional) RGB color e.g. rgb(255,255,255) |
foreground | (optional) RGB color e.g. rgb(0,0,0) |
logo | (optional) Path to the logo either png or jpg |
curl --location --request POST 'https://b2s.io/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/qr/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'type' => 'link',
'data' => 'https://google.com',
'background' => 'rgb(255,255,255)',
'foreground' => 'rgb(0,0,0)',
'logo' => 'https://site.com/logo.png',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 3,
"link": "https:\/\/b2s.io\/qr\/a58f79"
}
https://b2s.io/api/qr/:id/update
Pour mettre à jour un QR Code, vous devez envoyer une donnée valide au format JSON via une requête PUT. Les données doivent être envoyées en tant que corps brut de votre demande, comme indiqué ci-dessous. L'exemple ci-dessous montre tous les paramètres que vous pouvez envoyer mais vous n'êtes pas obligé de tous les envoyer (voir le tableau pour plus d'informations).
Paramètre | La description |
---|---|
data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
background | (optional) RGB color e.g. rgb(255,255,255) |
foreground | (optional) RGB color e.g. rgb(0,0,0) |
logo | (optional) Path to the logo either png or jpg |
curl --location --request PUT 'https://b2s.io/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/qr/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'type' => 'link',
'data' => 'https://google.com',
'background' => 'rgb(255,255,255)',
'foreground' => 'rgb(0,0,0)',
'logo' => 'https://site.com/logo.png',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "QR has been updated successfully."
}
https://b2s.io/api/qr/:id/delete
Pour supprimer un code QR, vous devez envoyer une demande DELETE.
curl --location --request DELETE 'https://b2s.io/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/qr/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "QR Code has been deleted successfully."
}
https://b2s.io/api/account
Pour obtenir des informations sur le compte, vous pouvez envoyer une demande à ce point de terminaison et il renverra des données sur le compte.
curl --location --request GET 'https://b2s.io/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/account",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"data": {
"id": 1,
"email": "sample@domain.com",
"username": "sampleuser",
"avatar": "https:\/\/domain.com\/content\/avatar.png",
"status": "pro",
"expires": "2022-11-15 15:00:00",
"registered": "2020-11-10 18:01:43"
}
}
https://b2s.io/api/account/update
Pour mettre à jour les informations sur le compte, vous pouvez envoyer une demande à ce point de terminaison et il mettra à jour les données sur le compte.
curl --location --request PUT 'https://b2s.io/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"email": "newemail@google.com",
"password": "newpassword"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/account/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'email' => 'newemail@google.com',
'password' => 'newpassword',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Account has been successfully updated."
}
https://b2s.io/api/domains?limit=2&page=1
To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/domains?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"domains": [
{
"id": 1,
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
},
{
"id": 2,
"domain": "https:\/\/domain2.com",
"redirectroot": "https:\/\/rootdomain2.com",
"redirect404": "https:\/\/rootdomain2.com\/404"
}
]
}
}
https://b2s.io/api/domain/add
A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.
Paramètre | La description |
---|---|
domain | (required) Branded domain including http or https |
redirectroot | (optional) Root redirect when someone visits your domain |
redirect404 | (optional) Custom 404 redirect |
curl --location --request POST 'https://b2s.io/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/domain/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'domain' => 'https://domain1.com',
'redirectroot' => 'https://rootdomain.com',
'redirect404' => 'https://rootdomain.com/404',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 1
}
https://b2s.io/api/domain/:id/update
To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Paramètre | La description |
---|---|
redirectroot | (optional) Root redirect when someone visits your domain |
redirect404 | (optional) Custom 404 redirect |
curl --location --request PUT 'https://b2s.io/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/domain/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'redirectroot' => 'https://rootdomain-new.com',
'redirect404' => 'https://rootdomain-new.com/404',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Domain has been updated successfully."
}
https://b2s.io/api/domain/:id/delete
To delete a domain, you need to send a DELETE request.
curl --location --request DELETE 'https://b2s.io/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/domain/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Domain has been deleted successfully."
}
https://b2s.io/api/files?limit=2&page=1
Get all of your files. You can also search by name.
Paramètre | La description |
---|---|
name | (optional) Search for a file by name |
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/files?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/files?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"result": 3,
"perpage": 15,
"currentpage": 1,
"nextpage": null,
"maxpage": 1,
"list": [
{
"id": 1,
"name": "My Photo",
"downloads": 10,
"shorturl": "https:\/\/b2s.io\/Yajvn",
"date": "2022-08-09 17:00:00"
},
{
"id": 2,
"name": "My Documents",
"downloads": 15,
"shorturl": "https:\/\/b2s.io\/DmKKP",
"date": "2022-08-10 17:01:00"
},
{
"id": 3,
"name": "My Files",
"downloads": 5,
"shorturl": "https:\/\/b2s.io\/egIPg",
"date": "2022-08-11 19:01:00"
}
]
}
https://b2s.io/api/files/upload/:filename?name=My+File
Upload a file by sending the binary data as the post body. You need to send the file name including the extension instead of :filename in the url (e.g. brandkit.zip). You can set options by sending the following parameters.
Paramètre | La description |
---|---|
name | (optional) File name |
custom | (optional) Custom alias instead of random alias. |
domain | (optional) Custom Domain |
password | (optional) Password protection |
expiry | (optional) Expiration for the download example 2021-09-28 |
maxdownloads | (optional) Maximum number of downloads |
curl --location --request POST 'https://b2s.io/api/files/upload/:filename?name=My+File' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '"BINARY DATA"'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/files/upload/:filename?name=My+File",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode('BINARY DATA'),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 1,
"shorturl": "https:\/\/b2s.io\/gxBHf"
}
https://b2s.io/api/urls?limit=2&page=1&order=date
Pour obtenir vos liens via l'API, vous pouvez utiliser ce point de terminaison. Vous pouvez également filtrer les données (voir le tableau pour plus d'informations).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
order | (optional) Sort data between date or click |
curl --location --request GET 'https://b2s.io/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/urls?limit=2&page=1&order=date",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"urls": [
{
"id": 2,
"alias": "google",
"shorturl": "https:\/\/b2s.io\/google",
"longurl": "https:\/\/google.com",
"clicks": 0,
"title": "Google",
"description": "",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"alias": "googlecanada",
"shorturl": "https:\/\/b2s.io\/googlecanada",
"longurl": "https:\/\/google.ca",
"clicks": 0,
"title": "Google Canada",
"description": "",
"date": "2020-11-10 18:00:25"
}
]
}
}
https://b2s.io/api/url/:id
Pour obtenir les détails d'un seul lien via l'API, vous pouvez utiliser ce point de terminaison.
curl --location --request GET 'https://b2s.io/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/url/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"details": {
"id": 1,
"shorturl": "https:\/\/b2s.io\/googlecanada",
"longurl": "https:\/\/google.com",
"title": "Google",
"description": "",
"location": {
"canada": "https:\/\/google.ca",
"united states": "https:\/\/google.us"
},
"device": {
"iphone": "https:\/\/google.com",
"android": "https:\/\/google.com"
},
"expiry": null,
"date": "2020-11-10 18:01:43"
},
"data": {
"clicks": 0,
"uniqueClicks": 0,
"topCountries": 0,
"topReferrers": 0,
"topBrowsers": 0,
"topOs": 0,
"socialCount": {
"facebook": 0,
"twitter": 0,
"google": 0
}
}
}
https://b2s.io/api/url/add
Pour raccourcir un lien, vous devez envoyer une donnée valide en JSON via une requête POST. Les données doivent être envoyées en tant que corps brut de votre demande, comme indiqué ci-dessous. L'exemple ci-dessous montre tous les paramètres que vous pouvez envoyer mais vous n'êtes pas obligé de tous les envoyer (voir le tableau pour plus d'informations).
Paramètre | La description |
---|---|
url | (required) Long URL to shorten. |
custom | (optional) Custom alias instead of random alias. |
type | (optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages |
password | (optional) Password protection |
domain | (optional) Custom Domain |
expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
geotarget | (optional) Geo targeting data |
devicetarget | (optional) Device targeting data |
languagetarget | (optional) Language targeting data |
metatitle | (optional) Meta title |
metadescription | (optional) Meta description |
metaimage | (optional) Link to a jpg or png image |
curl --location --request POST 'https://b2s.io/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/url/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'url' => 'https://google.com',
'custom' => 'google',
'password' => 'mypass',
'expiry' => '2020-11-11 12:00:00',
'type' => 'splash',
'metatitle' => 'Not Google',
'metadescription' => 'Not Google description',
'metaimage' => 'https://www.mozilla.org/media/protocol/img/logos/firefox/browser/og.4ad05d4125a5.png',
'geotarget' =>
array (
0 =>
array (
'location' => 'Canada',
'link' => 'https://google.ca',
),
1 =>
array (
'location' => 'United States',
'link' => 'https://google.us',
),
),
'devicetarget' =>
array (
0 =>
array (
'device' => 'iPhone',
'link' => 'https://google.com',
),
1 =>
array (
'device' => 'Android',
'link' => 'https://google.com',
),
),
'languagetarget' =>
array (
0 =>
array (
'language' => 'en',
'link' => 'https://google.com',
),
1 =>
array (
'language' => 'fr',
'link' => 'https://google.ca',
),
),
'parameters' =>
array (
0 =>
array (
'name' => 'aff',
'value' => '3',
),
1 =>
array (
'device' => 'gtm_source',
'link' => 'api',
),
),
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 3,
"shorturl": "https:\/\/b2s.io\/google"
}
https://b2s.io/api/url/:id/update
Pour mettre à jour un lien, vous devez envoyer une donnée valide en JSON via une requête PUT. Les données doivent être envoyées en tant que corps brut de votre demande, comme indiqué ci-dessous. L'exemple ci-dessous montre tous les paramètres que vous pouvez envoyer mais vous n'êtes pas obligé de tous les envoyer (voir le tableau pour plus d'informations).
Paramètre | La description |
---|---|
url | (required) Long URL to shorten. |
custom | (optional) Custom alias instead of random alias. |
type | (optional) Redirection type [direct, frame, splash] |
password | (optional) Password protection |
domain | (optional) Custom Domain |
expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
geotarget | (optional) Geo targeting data |
devicetarget | (optional) Device targeting data |
languagetarget | (optional) Language targeting data |
metatitle | (optional) Meta title |
metadescription | (optional) Meta description |
metaimage | (optional) Link to a jpg or png image |
curl --location --request PUT 'https://b2s.io/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/url/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'url' => 'https://google.com',
'custom' => 'google',
'password' => 'mypass',
'expiry' => '2020-11-11 12:00:00',
'type' => 'splash',
'geotarget' =>
array (
0 =>
array (
'location' => 'Canada',
'link' => 'https://google.ca',
),
1 =>
array (
'location' => 'United States',
'link' => 'https://google.us',
),
),
'devicetarget' =>
array (
0 =>
array (
'device' => 'iPhone',
'link' => 'https://google.com',
),
1 =>
array (
'device' => 'Android',
'link' => 'https://google.com',
),
),
'parameters' =>
array (
0 =>
array (
'name' => 'aff',
'value' => '3',
),
1 =>
array (
'device' => 'gtm_source',
'link' => 'api',
),
),
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 3,
"short": "https:\/\/b2s.io\/google"
}
https://b2s.io/api/url/:id/delete
Pour supprimer un lien, vous devez envoyer une requête DELETE.
curl --location --request DELETE 'https://b2s.io/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/url/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Link has been deleted successfully"
}
https://b2s.io/api/pixels?limit=2&page=1
To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/pixels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"pixels": [
{
"id": 1,
"type": "gtmpixel",
"name": "GTM Pixel",
"tag": "GA-123456789",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "twitterpixel",
"name": "Twitter Pixel",
"tag": "1234567",
"date": "2020-11-10 18:10:00"
}
]
}
}
https://b2s.io/api/pixel/add
A pixel can be created using this endpoint. You need to send the pixel type and the tag.
Paramètre | La description |
---|---|
type | (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok |
name | (required) Custom name for your pixel |
tag | (required) The tag for the pixel |
curl --location --request POST 'https://b2s.io/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/pixel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'type' => 'gtmpixel',
'name' => 'My GTM',
'tag' => 'GTM-ABCDE',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"id": 1
}
https://b2s.io/api/pixel/:id/update
To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Paramètre | La description |
---|---|
name | (optional) Custom name for your pixel |
tag | (required) The tag for the pixel |
curl --location --request PUT 'https://b2s.io/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "My GTM",
"tag": "GTM-ABCDE"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/pixel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'My GTM',
'tag' => 'GTM-ABCDE',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Pixel has been updated successfully."
}
https://b2s.io/api/pixel/:id/delete
To delete a pixel, you need to send a DELETE request.
curl --location --request DELETE 'https://b2s.io/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/pixel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": 0,
"message": "Pixel has been deleted successfully."
}
https://b2s.io/api/splash?limit=2&page=1
To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/splash?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"splash": [
{
"id": 1,
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"name": "Product 2 Promo",
"date": "2020-11-10 18:10:00"
}
]
}
}
https://b2s.io/api/overlay?limit=2&page=1
To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).
Paramètre | La description |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://b2s.io/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://b2s.io/api/overlay?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"cta": [
{
"id": 1,
"type": "message",
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "contact",
"name": "Contact Page",
"date": "2020-11-10 18:10:00"
}
]
}
}